Creating Your Own ProxCP KVM Templates

From ProxCP Documentation
Revision as of 01:25, 26 July 2020 by Proxcp (talk | contribs)

This tutorial covers how to create a custom KVM template for use with ProxCP and Proxmox.

Required: at least 1 Proxmox node

Assumption: The desired operating system ISO is already downloaded onto your Proxmox node.

The commands covered here are relevant to Debian and RHEL-based operating systems however the process can be applied to any other operating system.

Create VM

  • Create a new VM in Proxmox with the following settings:
    • VMID: anything
    • Name: operating system description (i.e. centos-8-amd64)
    • OS: your chosen ISO image
    • Hard Disk: use VirtIO SCSI (scsi0) with 10GB storage and no caching
    • CPU & Memory: 1 kvm64 CPU core, 1GB memory
    • Network: VirtIO (virtio0), vmbr0 bridge, no firewall
  • After creation, go to the Hardware tab and delete the CDROM ISO. Add a cloud-init drive on ide2. Add the CDROM ISO back as ide0.

Base OS

  • Boot the new VM and complete the base operating system installation. Generally, templates should use most default settings and minimal packages. There are a few things to keep in mind during installation:
    • Partitions: create 1 ext4 root "/" partition (no LVM, no SWAP)
    • Networking: use a generic hostname (i.e. localhost or centos-8-amd64)
    • Packages: use minimal packages, however the OpenSSH server is required

OS Setup Stage 1

  • Once the base OS installation is complete, shutdown the VM
  • In Proxmox, go to Options and set the boot order to scsi0 only (1 option)
  • Go to the Hardware tab and remove the ide0 CDROM. Verify the network device is net0 using vmbr0 bridge
  • Power on the VM
  • Login as root
  • If you created a user during installation, remove that user with deluser [username] && rm -rf /home/[username]
  • Complete updates apt update && apt upgrade && apt install setserial or yum update && yum install setserial

Serial Console Setup

KVM templates have to be configured to use a serial console for noVNC access.

  • Edit the /etc/default/grub file:
    • Add or replace
GRUB_CMDLINE_LINUX='quiet console=tty0 console=ttyS0,115200'
GRUB_TERMINAL=serial
GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"
    • Save the file
  • Run update-grub (debian/ubuntu) or grub2-mkconfig -o /boot/grub2/grub.cfg (centos/rhel)
  • Run cat /etc/securetty | grep ttyS0 and ensure ttyS0 is in /etc/securetty. This file may not exist which is okay.

If you are creating a template for a newer operating system using "systemd":

  • Run systemctl enable serial-getty@ttyS0.service && systemctl start serial-getty@ttyS0.service
  • Shutdown the VM shutdown -h now